UK DELIVERY - We Deliver Trailers Direct To Your Door.

PERSONAL & BUSINESS FINANCE available on all trailers

Follow us :
£0.00 0

Cart

No products in the cart.

Iwan
×
Usually replies within a few minutes

Trailer Tyre Pressure: A Practical UK Guide

Search Post

Categories

How Can We Help?
Get in touch if you have any questions or would like further information about our trailers.
Trailer Tyre Pressure: A Practical UK Guide

Trailer Tyre Pressure: A Practical UK Guide

A trailer that feels unsettled at 50mph, wears its tyres at the edges or seems to pull harder than usual often has one simple issue behind it. Correct trailer tyre pressure is fundamental to safe, stable towing, whether you are moving a track car, mini digger, landscaping equipment or general trade load. It takes only a few minutes to check, but the right figure depends on the tyres, the trailer and the load being carried.

Why trailer tyre pressure matters on the road

Your trailer tyres carry a substantial share of the work. They support the load, absorb impacts from poor road surfaces and help the trailer track predictably behind the towing vehicle. Too little pressure allows the sidewalls to flex excessively. This generates heat, affects handling and can lead to rapid wear or, in the worst case, tyre failure.

Overinflation has its own drawbacks. An overinflated tyre has a smaller contact patch with the road, can make an unladen trailer feel harsh and may wear more quickly through the centre of the tread. It can also reduce the tyre’s ability to absorb bumps, which is worth considering when transporting vehicles, machinery or delicate equipment.

Pressure is particularly relevant on a twin-axle trailer. If one tyre is significantly lower than the others, it can change how the load is shared across the axles and make the trailer less composed under braking or through bends. The issue may not be obvious at low speeds around a yard, but it becomes far more significant on a motorway journey.

Find the correct trailer tyre pressure

There is no single PSI figure that suits every trailer. The correct pressure is set by the tyre and trailer manufacturer for a particular application, tyre size, load rating and maximum authorised mass. Start with the trailer handbook, tyre-pressure label or specification information supplied with the trailer. If the trailer has been fitted with different wheels or tyres since new, confirm that the recommendation still applies.

The markings on a tyre sidewall tell you a great deal, including its size, construction, load index and maximum pressure. However, the maximum pressure shown on the tyre is not automatically the pressure you should use. It is a limit associated with the tyre’s rated capacity, not a substitute for the trailer manufacturer’s operating guidance.

For a new Brian James Trailer, use the supplied documentation as your first reference point. For an older, used or modified trailer, a tyre professional or trailer specialist can help verify that the wheel and tyre specification is suitable for the trailer’s plated weight and intended use. This is especially worthwhile if you regularly carry heavy plant, a loaded vehicle transporter or machinery close to the trailer’s payload limit.

Match the pressure to the load, not a guess

Some trailer manufacturers specify one pressure for normal use, while others provide different guidance for unladen and laden operation. Follow the information for your exact model rather than reducing pressure simply because the trailer is empty. A trailer tyre is designed to operate at its specified pressure, and guessing can compromise stability and wear.

The load itself must also be within the trailer’s payload and axle limits. Correct tyre pressure cannot compensate for an overloaded trailer, poor weight distribution or insufficient nose weight. Keep heavier items low and positioned to achieve stable, sensible loading, then secure them properly before setting off.

How to check trailer tyre pressure properly

Check pressures when the tyres are cold, ideally before a journey or after the trailer has been parked for several hours. Driving warms the air inside the tyre and raises the reading, so checking immediately after a run can lead to an inaccurate adjustment.

Use a reliable pressure gauge rather than relying on visual checks. A tyre can be seriously underinflated while still looking reasonably normal, particularly on a trailer with stiff sidewalls. Check every tyre, including the spare if one is fitted, and refit valve caps afterwards to help keep dirt and moisture out of the valves.

A useful pre-tow routine includes the following checks:

  • Check each tyre against the specified cold pressure.
  • Look for cuts, bulges, cracking, embedded debris and uneven tread wear.
  • Confirm the wheel nuts are secure and have been tightened to the correct torque.
  • Inspect the spare tyre and make sure the wheel-changing equipment is present.
  • Check that the load is secure, lights work and the breakaway cable is correctly attached.

Do this before loading wherever possible. Access to the inner wheel on some twin-axle trailers can be tighter once a car or machine is in place.

Recognise the signs of incorrect pressure

Tread wear gives useful clues. Wear on both outer shoulders of the tread often points to underinflation, while excessive centre wear can indicate overinflation. Uneven wear on one side may instead suggest an alignment, bearing, suspension or brake issue. Do not assume every worn tyre is purely a pressure problem.

A trailer that bounces, wanders, pulls to one side or feels unstable deserves attention before its next journey. So does a tyre that repeatedly loses pressure. Slow leaks can come from a puncture, corroded wheel rim, damaged valve or ageing tyre. Adding air every few weeks is not a fix – it is a reason to arrange an inspection.

Age matters as much as tread depth. Trailer tyres can deteriorate even when the trailer covers few miles, particularly if it spends long periods parked outdoors. Look closely for cracks in the sidewall and between tread blocks. Sunlight, standing water, long-term loading and infrequent use all contribute to deterioration.

Pressure checks for stored and seasonal trailers

A car transporter used for occasional track days, or a plant trailer used only when a particular contract starts, can sit still for weeks at a time. Tyres naturally lose some air over time, so check them before every outing rather than assuming the previous setting is still correct.

Avoid leaving a loaded trailer parked for extended periods. If storage is unavoidable, park on firm, level ground, keep the tyres away from oils and solvents, and move the trailer occasionally where practical. Tyre covers can help protect against prolonged UV exposure, although they do not replace regular inspection.

Before a longer trip, especially one involving motorway mileage, check pressure, tread condition and tyre temperatures during planned stops. Do not touch a tyre or wheel if you suspect overheating. A very hot tyre, smell of hot rubber or a wheel that appears unusually hot can indicate a serious fault requiring professional attention.

Do not overlook tyre specification

The pressure reading only works when the tyre itself is right for the job. Trailer tyres need sufficient load capacity for the weight carried on each axle, including a realistic allowance for how the load is distributed. Tyres on the same axle should be of matching size, construction and load rating, with comparable tread condition.

When replacing tyres, fitting a cheaper tyre with a lower load index can be a false economy. It may not offer the capacity or durability required for regular commercial use, a fully loaded car transporter or a plant trailer working near its maximum weight. The same applies to wheel choice: wheel ratings, tyre ratings and the trailer’s plated limits all need to work together.

If you are unsure what is fitted, take clear photographs of the tyre sidewall markings and trailer identification plate before seeking advice. This makes it much easier to confirm the correct replacement or operating specification.

A small check that protects a valuable load

Tyre pressure is easy to overlook because it is not as visible as ramps, brakes or lighting. Yet it has a direct effect on how confidently your trailer tows and how well it protects the vehicle, machine or equipment behind you. Build the check into every departure routine, follow the specification for your trailer, and investigate any repeat loss of pressure or unusual wear promptly. If the figures or tyre markings are unclear, The Trailer Store team can help you make sense of the specification before the next load goes on.

Tags :

Share :

    The Brian James Trailers experts! We have over 30 years experience helping customers choose the right trailer for their needs.
    Contact us for help & advice.
    The Trailer Store is an Introducer Appointed Representative (FRN 1048189) of Chatsbrook Finance Limited who is authorised and regulated by the Financial Conduct Authority FRN 803820

    Useful Links

    Payment

    Contact us

    • Trewyn Fawr, Carrog Road
      Corwen
      Denbighshire
      LL21 9RW
    • 01490 340598
    • sales@thetrailerstore.co.uk
    The Trailer Store © 2026 All Rights Reserved.